After programming a tune file, you may notice that your SDGT with Cruse Control has a flashing CC light. Please follow this sequence to reset the light:
- Switch ignition ON: To do this, briefly press the RACE-ON button.
- The cruise control lamp will flash.
- Press the cruise control tip switch on the left for 3 seconds.
- Press the cruise control tip switch to position RES/+ for 3 seconds.
- Press the cruise control tip switch to position SET/- for 3 seconds.
- Turn the throttle grip forward past the neutral position.
- The cruise control lamp will turn off.
- Switch ignition OFF.